If an error code (Er 20) appears ashing on the remote screen,
this indicates that there has been an issue with the room
temperature sensor. Please contact customer service. .
Error Codes
Maintenance
Battery Replacement
see section for tting batteries.
NOTE:
Whenever new batteries are fitted or replaced the Bluetooth remote control will
automatically reconnect with the product. However, the time and date settings on the
handset will have been lost and must be reset for time profiles to function correctly
IMPORTANT
Battery should be disposed of in an appropriate manner
Cleaning
General Cleaning
External appearance can be maintained by wiping occasionally with a damp cloth; for
stain removal, a weak soap solution can be applied, then wipe dry.
WARNING - ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE
CLEANING THE HEATER.
35
To Next Page
Loading...
