Need help?Do you have a question about the Dimplex Winterwarm WWFH20E and is the answer not in the manual?
Covers covering grilles, using near water, placement below sockets, dust, and hot surfaces.
Guidelines for appliance use by children of different age groups, emphasizing supervision.
Ensures double pole isolating switch compliance and safe thermal cut-out operation.
Critical warnings regarding battery ingestion, safe handling, compartment security, and disposal.
Details on routing electrical supply, IEE regulations, and replacement of damaged cords.
Details compliance with Lot20 of the Energy Efficiency Directive and control features.
Provides model identifier, dimensions, heat output, and auxiliary electricity consumption.
Overview of controls, controller UI, and controller functions including Bluetooth connectivity.
Details on construction, element, safety, IP rating, supply, approvals, warranty, and origin.
Information on fitting the heater into furniture units, plinth height, and width requirements.
Covers the need for a competent electrician, IEE regulations, and pre-installation checks.
Instructions for cutting the plinth aperture and positioning the heater.
Guidance on connecting the power cable, isolating switch, and ensuring sufficient slack.
Steps for fitting the rear support bracket, marking fixing positions, and securing the heater.
Introduces the remote, its display screen, buttons, and provides a symbol key.
Explains primary button functions and advanced shortcuts for controlling the appliance.
Instructions for fitting the two AA batteries into the remote control.
Guidance on mounting the remote control cradle to a wall and optional screw usage.
Step-by-step instructions for pairing the Bluetooth remote control with the heater.
Procedure for setting the hour and minute digits on the remote control.
Procedure for setting the day, month, year, and daylight saving options.
Explains the remote display, buttons, and provides a key for all screen icons.
Details the primary functions of MENU, ENTER, BACK, ADV, and Arrow keys.
Lists specific key combinations for functions like Comfort Off, Temp Settings, and Factory Reset.
Procedure for waking the remote control from standby mode using the ENTER button.
Describes Timer Mode, Manual Mode, Frost Protect, and Comfort Off modes.
Explains Runback, Setback, Adaptive Start, and PIN Lock features.
Explains target temperature, heating status, and active mode display on the home screen.
Details how the remote enters sleep mode and the process of reconnection.
Explains menu navigation using buttons to select different operating modes.
Details the temperature control range, default settings, and adjustment capabilities.
Instructions on how to select between HI and LO heat output settings.
Describes the flexibility of Timer Mode, profiles, and notes on Adaptive Start/Setback.
Step-by-step guide to activate the Timer mode via the remote control.
Details selecting days, editing ON/OFF times, and set-point temperatures.
Notes on ensuring changes are saved by confirming final 'Off' time.
Instructions on how to copy a day's time profile and paste it to other days.
Describes Manual Mode, Frost Protection, and Comfort Off modes.
Step-by-step guide to activate Manual Mode (Comfort On) via the remote.
Details activating Frost Protect via menu or direct from manual mode.
Details activating Comfort Off via menu or by holding the BACK button.
Explains how the ADV button forces the next timer segment or stops heating early.
Explains how to start runback mode and select from available time durations.
Procedure for deactivating runback mode and returning to the previous heat setting.
Instructions to access the advanced menu by holding ADV and MENU buttons.
Lists the available advanced menu items: Runback, Setback, Adaptive Start, PIN Lock.
Details on activating and setting Runback mode ON or OFF.
Table outlining available runback durations and periods for selection.
How to select the desired runback time and temperature.
Explains how Setback overrides Heating Off periods to maintain temperature.
Details selecting Setback ON/OFF and setting the desired setback temperature.
Explains predictive pre-heating to ensure target temperature is met by the heating start time.
Instructions on how to activate or deactivate the Adaptive Start function.
Notes on implications of Adaptive Start when multiple heaters are installed.
Explains how PIN Lock secures the appliance by restricting basic functions.
Summarizes how the appliance behaves in different modes after PIN lock is applied.
Steps to activate the PIN Lock feature by setting a four-digit PIN.
Procedure to unlock the device by entering the correct PIN.
Information on what happens if an incorrect PIN is entered.
Instructions on how to toggle the temperature display between Celsius and Fahrenheit.
How to view appliance ID and software versions using the remote control.
How to enter the factory reset options by holding Up and Down buttons.
How to choose between resetting the Heater or Remote and confirm YES/NO.
Explains error code Er 20 and advises contacting customer service.
Notes on battery disposal, automatic reconnection, and resetting time/date.
Instructions for cleaning the exterior of the heater with a damp cloth.
Steps for vacuuming heater grilles and the interior compartment.
Important information on the disposal and recycling of electrical products.
Explains what the Winterwarm warranty covers, including repair or replacement.
Lists items and conditions not covered by the Winterwarm warranty.
Details warranty validity, proof of purchase, repair conditions, and dealer responsibilities.
Information on how to contact Winterwarm for warranty questions or claims.
To Next Page
General