XLE•Storage•Heater•Reporting•Screen•Guide
08/82056/0-1 ISSUE: 1
XLE•Series•Heater
1. Desired Room temperature set point (set by pressing
‘Arrow•Up’ / ‘Arrow•Down’ to increase / decrease the
temperature set point respectively. The temperature range
is from 7 to 26°C.)
2. Timer Mode, e.g. ‘User•Timer’, or ‘Out•All•Day’, (set by
the customer from within the ‘Mode’ -> ‘Timer’ menu.
3. Comfort On = Fan Enabled / Comfort Off = Fan Disabled.
This text line only indicates if the heater is within the Programmed time period (Comfort
period), or outside it. Controlled by the programmed On / Off (Comfort On / Off ) times (in
‘Timer’ settings). Fan is only enabled during the ‘Comfort•On’ times, and only when the room
temperature is below the ‘Set•Point’ set on the display.
User Timer
Co m f o rt On
1
2
3
1. Current Time
2. Comfort On = Fan Enabled / Comfort Off = fan Disabled.
This text line only indicates if the heater is within the
Programmed time period (Comfort period), or outside
it. Controlled by the programmed On / Off (Comfort
On / Off ) times (in ‘Timer’ settings). Fan is only enabled
during the ‘Comfort•On’ times, and only when the room
temperature is below the ‘Set•Point’ set on the display.
3. The time when the next Comfort•On period is due.
1
2
3
10 : 1 2
Co m f o rt Off
Ne x t on at
17 : 3 0
1. Functions Currently Enabled: BT (Bluetooth) / SL (Slave
Mode) / OW (Open Window detection ) / LL (Landlord
Lock).
2. Firmware revision.
3. Brand name on screen (optional).
4. Heater ID.
5. The counter of available Off -Peak supply to the heater, in minutes. NOT the heater charge
time.
6. Run (Charge) Time calculated, in minutes. The time XLE heater charged the current day.
7. Timer Mode, e.g. ‘User•Timer’, or ‘Out•All•Day’, (set by the customer from within the ‘Mode’ ->
‘Timer’ menu.
3
4
65
7
BT S L OW
UI : 0 6 1 CC: 0 1 7
Di m p l ex
AL 2 7 2 4
(5 ) ( 1 18)
Us e r Timer
1
2
To Next Page
Need help?
General
