21
15) Display will prompt:
Cart Copied.
Press Yes to Continue.
16) Press the “YES” key to continue.
17) Repeat steps 9-16 to copy information to additional carts.
18) Press the “CANCEL” key to exit programming.
Manual Starting of Carts
Regardless of what has been programmed, any Perfect-Temp cart may be manually started to
begin rethermalization at any time. The Station Commander display will confirm that a
Perfect-Temp cart has been properly plugged in.
1) Press the “MANUAL” key.
2) Enter pass code “333” on the keypad.
3) Display will prompt:
Select Cart:
1 2 3 4 5 6 7 8
4) Use the “ “ keys to highlight the cart you would like to manually start.
5) Press the “YES” key to select.
6) Display will prompt:
Select Meal:
Breakfast
Lunch
Dinner
7) Use the “ “ keys to highlight the meal you would like to thermalize
8) Press the “YES” key to start the meal.
9) Repeat steps 3-5 until you have started all carts you need to start.
10) Press the “CANCEL” key to exit programming.
To Next Page
Loading...
