DINGLI JCPT0607DCS - Page 32

OPERATOR’S MANUAL with Maintenance Information
Operating Instructions
27
Alarm code Description
113 CANBUS TIMEOUT 2 PCU CPU1
114 CANBUS TIMEOUT TM
115 CANBUS TIMEOUT SCISSOR ANGLE SENSOR
116 PRESSURE SENSOR REDUNDANT CHECK FAULT
117 ANALOG SCISSOR ANGLE REDUNDANT CHECK FAULT
120 KEY SWITCH INPUT CHECK FAULT
121 TOGGLE SWITCH INPUT CHECK FAULT
122 PIN29, INP00 REDUNDANT CHECK FAULT
123 PIN30, INP01 REDUNDANT CHECK FAULT
124 PIN32, INP02 REDUNDANT CHECK FAULT
125 PIN33, INP03 REDUNDANT CHECK FAULT
126 PIN06, INP04 REDUNDANT CHECK FAULT
127 PIN34, INP05 REDUNDANT CHECK FAULT
128 PIN45, INP10 REDUNDANT CHECK FAULT
129 PIN46, INP11 REDUNDANT CHECK FAULT
130 PIN47, INP12 REDUNDANT CHECK FAULT
131 PIN48, INP13 REDUNDANT CHECK FAULT
132 PIN49, INP14 REDUNDANT CHECK FAULT
133 PIN50, INP15 REDUNDANT CHECK FAULT
134 PIN19, INP RELAY REDUNDANT CHECK FAULT
135 PIN20, INP BRAKE REDUNDANT CHECK FAULT
136 PIN23, INP M1 REDUNDANT CHECK FAULT
137 PIN24, INP M2 REDUNDANT CHECK FAULT
140 PRESSURE SENSOR N.1 OPEN CIRCUIT OR SHORT TO GND
141 PRESSURE SENSOR N.1 SHORT CIRCUIT TO PWR
142 PRESSURE SENSOR N.1 VALUE LOWER THAN THRESHOLD MIN.
143 PRESSURE SENSOR N.1 VALUE GREATER THAN THRESHOLD MAX.
144 PRESSURE SENSOR N.2 OPEN CIRCUIT OR SHORT TO GND
145 PRESSURE SENSOR N.2 SHORT CIRCUIT TO PWR
146 PRESSURE SENSOR N.2 VALUE LOWER THAN THRESHOLD MIN.