OPERATOR’S MANUAL with Maintenance Information
Function Tests
29
button.
⊙ Result: The platform will not rise after lifting
for about 3.5m. The descent alarm should
sound.
101 The platform should lower to the stowed
position to Release outriggers leveling
machine.
102 Press and hold the lift function enable
button. Press and hold the platform up
button.
⊙ Result: The platform should rise.
103 Lower the platform.
104 Retract the outriggers.
105 Turn the key switch to platform control
position.
106 Turn off Indoor/outdoor button light and
select the indoor mode
107 Press the lift function select button.
108 Press and hold the function enable switch
on the control handle.
109 Slowly move the control handle in the
direction indicated by the blue arrow.
⊙ Result: The platform should rise
110 Press and hold the function enable switch.
Slowly move the control handle in the
direction indicated by the yellow arrow.
⊙ Result: The platform should lower to the
stowed position.
111 Turn on Indoor/outdoor button light and
select the outdoor mode
112 Press and hold the function enable switch
on the control handle.
113 Slowly move the control handle in the
direction indicated by the blue arrow.
⊙ Result: The platform will not rise after lifting
for about 3.5m. The descent alarm should
sound.
114 The platform should lower to the stowed
position to Release outriggers leveling
machine.
115 Press and hold the function enable switch
on the control handle.
116 Slowly move the control handle in the
direction indicated by the blue arrow.
⊙ Result: The platform should rise.
117 Lower the platform to the stowed position.
118 Retract the outriggers.
To Next Page
Loading...
