OPERATOR’S MANUAL with Maintenance Information
Maintenance
57
8 Center a lifting jack of ample capacity
(30,000 lbs / 15,000 kg) under the drive
chassis between the front wheels.
9 Lift the wheels off the ground and place
blocks under the drive chassis for support.
Crushing hazard. The
chassis could fall if not properly supported.
10 Release the brake.
11 Manually rotate each front wheel.
⊙ Result: Each wheel should rotate with
minimum effort.
12 Reset the brake. Rotate each wheel to
check for engagement. Raise the machine
and remove the blocks. Lower the
machine.
To Next Page