DINGLI S1012E User Manual

SELF-PROPELLED SCISSOR LIFTS
OPERATOR’S MANUAL
with Maintenance Information
For S0608EH/S0808EH/S0812EH/S1012EH/S1212EH/S1412-EHXC
For S0608E/S0808E/S0812E/S1012E/S1212E/S1412-EXC
( Hydraulic Motor / DC Motor Drive )
Part Number: SM0110111A_Rev4.0
Zhejiang Dingli Machinery Co., Ltd.
Fourth Edition, October 2018 Printing
WARNING
THE MANUFACTURER SHALL NOT BE HELD LIABLE IN CASE OF FAULTS
OR ACCIDENTS DUE TO NEGLIGENCE, INCAPACITY, INSTALLATION BY
UNQUALIFIED TECHNICIANS AND IMPROPER USE OF THE MACHINE
DO NOT OPERATE THIS MACHINE UNTIL YOU READ AND UNDERSTAND
ALL THE DANGERS,WARNINGS AND CAUTIONS IN THIS MANUAL

DINGLI S1012E Specifications

General

Brand	DINGLI
Model	S1012E
Category	Scissor Lifts
Language	English

Summary

Owners, Users and Operators

Owner and Operator Responsibilities

Safety Rules

Electrocution and Tip-over Hazards

Details electrical contact risks, safe distances, and capacity limits.

Work Area Safety and Capacity Limits

Platform Operation and Manual Force Limits

Operation on Slopes Hazard

Guidelines and ratings for safe operation on slopes.

Fall, Collision, and Component Damage Hazards

Addresses risks of falling, collision, and preventing component damage.

Explosion, Fire, Damage, and Injury Hazards

Covers risks related to batteries, hazardous locations, and bodily injury.

Tip-over, Lifting Hazards, and Lockout Procedure

Addresses tipping, lifting risks, and lockout procedures.

Specifications

S0608EH Specifications

Technical specifications for the S0608EH model.

S0808EH Specifications

Technical specifications for the S0808EH model.

S0812EH Specifications

Technical specifications for the S0812EH model.

S1012EH Specifications

Technical specifications for the S1012EH model.

S1212EH Specifications

Technical specifications for the S1212EH model.

S1412-EHXC Specifications

Technical specifications for the S1412-EHXC model.

S0608E Specifications

Technical specifications for the S0608E model.

S0808E Specifications

Technical specifications for the S0808E model.

S0812E Specifications

Technical specifications for the S0812E model.

S1012E Specifications

Technical specifications for the S1012E model.

S1212E Specifications

Technical specifications for the S1212E model.

S1412-EXC Specifications

Technical specifications for the S1412-EXC model.

Control Panel

Ground Control Panel Layout

Platform Control Panel Layout

Pre-operation Inspection

Workplace Inspection

Hazardous Workplace Conditions

Function Tests

Operating Instructions

Emergency Stop, Lowering, and Ground Controls

Platform Control Operations: Steering, Driving, and Speed

Slope Operation, Safety Arm, and Guardrail Folding

Troubleshooting Guide for Machine Malfunctions

Guide to diagnosing and resolving machine issues using error codes.

Transport and Lifting Instructions

Brake Release and Transit Securing

Lifting the Machine with a Forklift

Lifting Instructions and Center of Gravity Data

Maintenance

Scheduled Maintenance Procedures and Checklists

Checklist B: Tires, Wheels, and Emergency Stop Tests

Checklist B: Drive Brakes Test

Checklist B: Module Tray Latch and Limit Switches Test

Checklist B: Up Limit Switch Test

Checklist C: Platform Overload System Test

Checklist E: Hydraulic Oil Test or Replacement