DINGLI S0812E User Manual

SELF-PROPELLED SCISSOR LIFTS
OPERATOR’S MANUAL
with Maintenance Information
For S0608EH/S0808EH/S0812EH/S1012EH/S1212EH/S1412-EHXC
For S0608E/S0808E/S0812E/S1012E/S1212E/S1412-EXC
( Hydraulic Motor / DC Motor Drive )
Part Number: SM0110111A_Rev4.0
Zhejiang Dingli Machinery Co., Ltd.
Fourth Edition, October 2018 Printing
WARNING
THE MANUFACTURER SHALL NOT BE HELD LIABLE IN CASE OF FAULTS
OR ACCIDENTS DUE TO NEGLIGENCE, INCAPACITY, INSTALLATION BY
UNQUALIFIED TECHNICIANS AND IMPROPER USE OF THE MACHINE
DO NOT OPERATE THIS MACHINE UNTIL YOU READ AND UNDERSTAND
ALL THE DANGERS,WARNINGS AND CAUTIONS IN THIS MANUAL

DINGLI S0812E Specifications

General

Model	S0812E
Working Height	10m
Platform Height	8m
Load Capacity	230 kg
Platform Length	2.27m
Drive Type	Electric
Max Slope	25%
Overall Length	2.48m
Stowed Height (Rails Folded)	1.95 m
Drive Speed (Stowed)	3.5 km/h
Drive Speed (Raised)	0.8 km/h
Gradeability	25%
Ground Clearance	0.1m
Tyres	Non-marking

Summary

Safety Rules

General Safety and Decal Information

Covers Danger, Do Not Operate Unless, Decal Legend.

Hazard Identification and Prevention

Covers Electrocution, Tip-over, Work Area, Crushing, Fall, Collision.

Operational and Machine Condition Safety

Covers Slopes, Wind, Damaged Machine, Explosion/Fire.

Battery and Bodily Injury Safety

Covers Bodily Injury, Battery Safety, Burn.

Specifications

EH Series Models

Details for S0608EH, S0808EH, S0812EH, S1012EH, S1212EH, S1412-EHXC.

E Series Models

Details for S0608E, S0808E, S0812E, S1012E, S1212E, S1412-EXC.

Control Panel

Pre-operation Inspection

Inspection Procedures

Details the steps and components to inspect before operation.

Workplace Inspection

Identifying Workplace Hazards

Function Tests

Ground Control Operations

Platform Control Operations

System Performance Tests

Covers tilt sensor, pothole guards, and drive speed tests.

Operating Instructions

General Operation and Safety

Control Operations

Specific Operations and Safety

Transport and Lifting Instructions

General Transport Safety

Securing and Lifting Procedures

Maintenance

Daily and Quarterly Checks

Semi-Annual and Annual Checks