To Next PageTo Next Page
Need help?Do you have a question about the DINGLI S036-RS and is the answer not in the manual?
General| Model | S036-RS |
|---|---|
| Load Capacity | 240 kg |
| Drive Type | Electric |
| Max Slope | 25% |
| Overall Width | 0.76 m |
| Extension Deck | 0.6 m |
| Wheelbase | 1.2m |
| Occupancy | 1 person |
| Drive Speed | 4 km/h |
| Charger | 24V/15A |
| Power Supply | Battery |
| Control System | Proportional control |
| Lift Motor | 24V DC |
| Drive Motor | 24V DC |
| Wheel Type | Solid Tire |
Conditions and requirements that must be met before operating the machine.
Explanation of symbols, colors, and signal words used on machine decals.
Environmental requirements, intended use, and safety sign maintenance guidelines.
Details on various hazards (electrocution, tip-over, crushing, etc.) and necessary precautions.
Labeled diagram identifying key components of the scissor lift for reference.
List and verification of all safety and instruction decals on the machine.
Technical data including dimensions, capacities, speed, and power.
Description of ground and platform control panel functions and indicators.
Importance and purpose of the pre-operation inspection.
Detailed list of components and areas to check before operation.
Identifying and avoiding hazardous conditions in the operating environment.
Purpose and procedure for testing machine functions.
Step-by-step instructions for testing all machine functions.
Basic principles and intended use of the scissor lift.
Detailed steps for emergency stop, lowering, ground/platform operation, steering, and driving.
Guidelines for driving on inclines and using the safety arm.
Explanation of fault codes and their associated lift reactions.
Procedures for securing the machine for transit and lifting with a forklift.
Types and frequency of scheduled maintenance inspections.
Report format and instructions for initial machine preparation.
Forms and procedures for recording maintenance inspections.
Detailed procedures for daily, quarterly, semi-annual, annual, and biennial maintenance checks.
Visual representation of the machine's hydraulic system components and flow.
Visual representation of the machine's electrical system wiring and components.
Template for recording inspection and repair dates and comments.
