OPERATOR’S MANUAL with Maintenance Information
Decals
9
Decal Inspection
Use the pictures on the next page to verify that all decals are legible and in place.
Below is a numerical list with quantities and descriptions.
Decal, Notice-Keep the manual with the machine
Decal, Danger-Tip-over hazard, tilt-alarm
Decal, Danger-General safety rules
Decal, Instructions-Refer the operator to the instructions for
use
Decal, Label-Capacity 240kg
Decal, Instructions-Forklift pockets
Decal, Instructions-Tie down point
Decal, Instructions-Lift point
Decal, Instructions-Maximum wheel load 450kg
Decal, Instructions-Emergency lower
Decal, Notice-Main power switch operation
Decal, Instructions-Safety arm
Decal, Caution-Max. manual force 400N (Indoor) 200N
(Outdoor)
Decal, Label-Lanyard anchorage point
Nameplate, Manufacturer serial number
Decal, Danger-Explosion/burn hazard
Decal, Warning-Inspected and operation properly
Decal, Symbols-Electrocution hazard
Decal, Symbols-Platform power instructions