Do Not Operate Unless:
√ You learn and practice the principles of
safe machine operation contained in this
operator's manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation
inspection.
3 Inspect the workplace.
4 Always perform function tests prior
to use.
Know and understand the function tests
before going on to the next section.
5 Only use the machine as it was
intended.
Fundamentals
The function tests are designed to discover
any malfunctions before the machine is put
into service.
The operator must follow the step-by-step
instructions to test all machine functions.
A malfunctioning machine must never be used.
If malfunctions are discovered, the machine
must be tagged and removed from service.
Repairs to the machine may only be made by
a qualified service technician, according to the
manufacturer's specifications.
After repairs are completed, the operator must
perform a pre-operation inspection and
function tests again before putting the machine
into service.
To Next Page
Loading...
Need help?
General
