Dini Argeo DGT4 - Page 5

5
Optimized layout for A4 print.
TECH_MAN_ENG_DGT4_V8
Analog output configuration 46
Serial communication configuration 48
Selection of the PC serial port  48
Configuration of the printer port (COM.PRN) 49
Transmission mode  49
Baud rate, parity, data bits, stop bits  50
Printer power on mode  50
CTS signal  50
Print language  50
Reactivation of printing  51
Configuration of the PC port (COM.PC) 51
Transmission mode  51
Baud rate, parity, data bits, stop bits  52
Communication protocols 53
Standard string  53
Extended string  53
Multi-scale string  54
Serial commands  55
Diagnostics 58
Cells / converter test  58
Firmware release  58
Serial number  58
Display  58
Keypad  58
Serial ports  59
CTS signal  59
Inputs  59
Outputs  59
Analog output (mod. DGT4XAN)  59
Programming the Setpoints 59
Restoring factory settings 60
Date and time setting 60
Alarms 61