Dini Argeo TPR - 5 Technical Specifications

29
5. TECHNICAL SPECIFICATIONS
The table gives the main technical specifications for the 204 dpi printer model.
Print method
Thermal, fixed head
Resolution
203 DPI (8 dot/mm)
Paper specifications
Type of paper
Thermal rolls
Heat – sensitive side on outside of roll
Width
57.5 mm ± 0,5 mm
Internal roll core diameter
13mm
External roll core diameter
Max Ǿ 50 mm
Core type
Cardboard or plastic
Sensors
Head temperature, end paper, paper and optional: Cover open sesor
Printing Mode
Straight, Reverse
Printing Format
Height/Width from 1 of 2, bold, reverse, underlined.
Character Fonts
Standard ASCII, International
Available interfaces
RS232/ Centronics Parallel/TTL
Baud Rate
Da 600 a 38400 bps
Receive Buffer
128 bytes
Flash memory
32 Kbytes
Graphics memory
1 logo da 384 x 85 dots
Power supply
3,5 ÷ 8 V (Vcc)
3,5 ÷ 8 V (+ VP)
Absorptions (with power supply = 5 Volt)
Medium consumption
0.2 A (Vcc)
3.3 A (+ VP)
Stand by consumption
0.1 A
Absorption (Normal)
9 Vdc
48 Vdc
Medium
3 A
0.7 A
Stand by
0.1 A
Weight
(1)
141 gr.
Note:
(1)
Referred without paper roll
Environmental conditions
Operating temperature
0° C ± 50 ° C
Relative humidity
10 - 85% Rh
Storage temperature/humidity
-20 ° C ± 70 ° C / 10 % ±90% Rh
Colmns
24
40
Character matrix
16 x 24
8 x 24
Printing speed
Lines/ sec
13
Chars / sec
307
512
Characters (L x H)
Normal
2 x 3
1 x 3