3.2 Self test
Printer operating status is indicated in the configuration print-out in which, next to the name of the components displayed
(see fig.1.4), the following information is given:
• under HEAD TEMPERATURE is given the temperature of the head.
• under HEAD VOLTAGE is given the voltage of head.
*PRINTER SETUP*
HEAD TEMPERATURE [°C] = 32.5
HEAD VOLTAGE [V] = 5,0
Baud Rate: 38400 bps
Data length: 8 bits/chr
Parity: None
Handshaking: Xon/Xoff
Autofeed: CR disabled
Columns: 24 col.
Print Mode: Normal
Chars Mode: Normal
Alignment: Disabled
Print Density: 0
[PUSH]ENTER SET-UP
[FASTPUSH]EXIT
To Next Page
Loading...