Dini Argeo TPR - 3 Printer Connections; Power Supply

6
3. PRINTER CONNECTIONS
3.1 POWER SUPPLY
The printer is equipped with a 4 pin JS4 male connector (90°) for the power supply. The signals on the connector pins are
as follows:
Model no. type: Header S4B-PH-K-S 90°gradi (JST)
Housing :PHR-4 (JST) o equivalent
TAB.1.1
PIN n°
SIGNAL
NOTE
1
GND
2
GND
3
+VP: from 3.5 Vdc to 8 Vdc
(head voltage)
4
+VC: from 3.5 Vdc to 8 Vdc
(logic supply voltage)
ATTENTION
Respect the polarity of the power supply.