3
1. Connection to the board
There are 2 different way to connect to the board to configure it.
1.1 Through WiFi
Choose HI-LINK_5BC3 available in the WIFI list of the PC.
( Example of list of available WiFi networks )
Insert the security key requested: 12345678 and press OK
1.2 Through Ethernet cable
Connect on the ETHD-1 through a direct Ethernet cable on the RJ45 port called LAN.
LAN port on the ETHD-1 board.
On the other side, connect on the RJ45 port ( Ethernet )
of the PC
Example on the Notebook
Example on the Pc desktop
To Next Page
Loading...
Need help?
General