(314) 205-3033 WWW.DIODEDYNAMICS.COM
PAGE 1
Ram Vertical Foglight Kit
Thank you for your purchase of our new SS3 Ram Vertical Foglight Kit. CAD-designed to use
existing mounting points, this kit is compatible with the 2013-2018 Ram 1500. Basic installation
instructions are included below. Please contact us if you have any questions.
SS3
3” LED Pod
See back for further instructions.
TOP
BOTTOM
1. Install the supplied nuts into the pod housing with the nylon facing inward. Attach the
bracket to the pod using the supplied screws and washers. See diagrams above. The screws
will also determine the aim of your SS3 pods.
Ensure that the screws are tightened such that
the pod retains its position, but can pivot with force for aiming.
Driver/Left Side (opposite for passenger/right side)
To Next Page
Need help?
General
