EasyManuals Logo

Diode Dynamics STAGE Series Quick Start Guide

Diode Dynamics STAGE Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PP0081
PP0132C
Type MS Foglight Kit
SS3
3” LED Pod
PAGE 4
WARRANTY
3 YEAR
This installation guide is for the following SKUs:
DD6576 Worklight SS3 Sport Type MS Kit White SAE Driving
DD6577 Worklight SS3 Sport Type MS Kit White SAE Fog
DD6578 Worklight SS3 Sport Type MS Kit Yellow SAE Fog
DD6579 Worklight SS3 Pro Type MS Kit White SAE Driving
DD6580 Worklight SS3 Pro Type MS Kit White SAE Fog
DD6581 Worklight SS3 Pro Type MS Kit Yellow SAE Fog
DD6706 Worklight SS3 Max Type MS Kit White SAE Fog
DD6707 Worklight SS3 Max Type MS Kit Yellow SAE Fog
Please contact Diode Dynamics should you have any questions about the installation
or wiring process, at 314-205-3033 (10a-5p CST) or contact@diodedynamics.com.
GUARANTEE
100% SATISFACTION
8
year
warranty
PP0170
Scan the QR code to link to our YouTube Channel!
NEED MORE HELP?
We continuously bring in vehicles to our testing garage in order to
create step-by-step videos to walk you through the installation process
on your specic vehicle. Scan the QR code to see all our installation
videos. Be sure to subscribe to our channel to stay up-to-date on the
newest products and videos from Diode Dynamics!
25 feet
Top of
Beam
Level
Measure lamp height to center
Four
(
4
)
inches
13. Aim your SS3 pods on each side, so that
the top of the beam pattern is on the
cuto line mark.
14. Tighten the 5/32” allen bolts back down.
PAGE 1
(314) 205-3033 WWW.DIODEDYNAMICS.COM
See inside for further instructions.
15. R
einstall the fog light covers and splash
guard to complete the installation.
Thank you for your purchase of our new SS3 Type MS Foglight Kit. CAD-designed to use existing
mounting points, this kit is compatible with the Jeep JL Wrangler and JT Gladiator Sport. Basic
installation instructions are included below. Please contact us if you have any questions.
TOP
BOTTOM
1. Attach the bracket to the pod loosely, using one screw
on each side. These screws will also determine the aim of
your SS3 pods. See the diagrams above and to the right.
Make sure the bracket is in the correct orientation.
Left and Right Sides
Factory
Hardware

Other manuals for Diode Dynamics STAGE Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Diode Dynamics STAGE Series and is the answer not in the manual?

Diode Dynamics STAGE Series Specifications

General IconGeneral
BrandDiode Dynamics
ModelSTAGE Series
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals