Warning: Device has been calibrated at the factory, however it is highly recommended to do a
manual calibration before starting to use it. The user can calibrate it periodically if desired. The rst
time the CO2 Sensor can take up to 10 days to fully balance and present accurate data. Calibration
must be carried out in an outdoor environment.
Setting options Optional parameters Setting method
OFF Backlinght OFF / 1min / 5min / 10min /
30min / 1houn
Press the key
/ /
Record interval
Press key
/ / to up setting pop
options, press the key /
to
select and
press the key to return
Backlight 25% / 50% / 75% / 100%
Press the key
/ /
Data Clear Yes / No
Press the key
/ /
Max Min Mode OFF / ON
Press the key
/ /
ENGLISH
To Next Page
Loading...