4. Industry
The carbon dioxide detector is widely used in
the Industry such as wastewater treatment,
factory building, workshop, temperature,
cleaning room, production safety and all types
of Industries. Especially, it is very necessary to
monitor the carbon dioxide in borehole operation.
The carbon dioxide detector is used generally in
metal processing, paper pulp and paper making,
cleaning and solvent extraction as well as lower
temperature cleaning and carbon dioxide
relevant Industry.
Safety and maintenance
1. It is recommended to do a manual calibration
before starting to use the CO2 meter so that it
will perform the measurements correctly.
2 .Please do not use the meter under a dusty or
corrosive gas environment so as not to result in
shorter service life or damage.
3. When the battery icon on the display screen is
blank or red, please charge the battery in a timely
manner. When it lies idle for long, it is required to
take out the battery.
4. Please do not store or use the meter under
a high temperature, high humidity, ammable,
explosive and strong electromagnetic eld.
5. During the care of it, please use soft cloth and
neutral cleaning agents to clean the housing.
Never use abrasives or solution so as not to cause
corrosion to the housing and damage to the meter.
ENGLISH
To Next Page
Loading...