Notification of CEE requirements:
D.I.P. IMPEX SRL, located at 287 Theodor Pallady Blvd., 032258 Bucharest, Romania,
manufactures the DS-68 On demand Grinder in compliance to CEE requirements:
N73/23 (low tension)
N89/392 (machines)
The DS-68 On demand Grinder has been tested in accordance the following norms:
• EN 60 335-1
• EN 55011
• EN 61000-3-2
• IEC/EN 61000-4-2, -4, -5, -6, -8, -9, -11, -29 (safety regulations for domestic
or similar use)
• EN 335/264 (2nd part: safety regulations for professional kitchen
instruments).
D.I.P. IMPEX SRL
Technical office
Bucharest, 20/10/2017
To Next Page
Loading...
