Direct Supply Panacea 6300 User Manual (English)

Other manuals for Direct Supply Panacea 6300

Questions and Answers:

M
Micheal MyersAug 2, 2025
How to troubleshoot Direct Supply Medical Equipment bed that doesn't work?
- J
  jsmithAug 2, 2025
  If your Direct Supply Medical Equipment bed isn't working at all, first check if the bed is properly plugged into a working wall outlet. A damaged power cord could also be the culprit, in which case you should contact Direct Supply Equipment & Furnishings for a replacement. Ensure all wire connections and power cords are securely connected. Also, make sure the pendant is properly plugged in and the connection holder is closed. If the pendant itself is faulty, replacing it might solve the issue. If a blown fuse in the control box is suspected, unplug the bed for 5 minutes; if the problem persists, contact Direct Supply Equipment & Furnishings.
J
Jeffrey PalmerAug 7, 2025
What to do if some functions of my Direct Supply Medical Equipment bed aren't working?
- A
  Andre ChavezAug 7, 2025
  If one or more functions of your Direct Supply Medical Equipment bed aren't working, start by checking all wire connections to ensure they are secure. A faulty pendant could also be the cause; if the bed works with a different pendant, replace the original. A damaged actuator cord may also be responsible, requiring replacement by contacting Direct Supply Equipment & Furnishings. Finally, a faulty actuator might be the issue. If the actuator now works with a different pendant button, replace the control box after verifying the pendant works. If the actuator still doesn’t work, replace the actuator.
N
nicholstimothyAug 12, 2025
Why is my Direct Supply Panacea 6300 bed not level?
- J
  Jose FullerAug 12, 2025
  If your Direct Supply Medical Equipment bed is not level, it might be due to an actuator becoming unplugged from the control box; plug the actuator back in. Also, check for any obstructions that may have occurred during raising or lowering the bed and reposition the bed or remove the object. Uneven weight distribution on the bed can also cause this issue; remove the cause of the uneven weight. After correcting these potential causes, lower the bed completely until all movement stops, which should level the bed, and it should remain level when raised again.
D
dwrightAug 17, 2025
What to do if Direct Supply Medical Equipment bed stalls during operation?
- B
  brent65Aug 17, 2025
  If your Direct Supply Medical Equipment bed stalls while operating, it may be due to an obstruction. Remove the obstruction and wait before using the bed frame again. Avoid repeatedly trying to override the stall, as this can shorten the device's lifespan.
C
christinareyesAug 22, 2025
How to fix ratcheting noise from Direct Supply Panacea 6300 bed casters?
- J
  Jennifer BurtonAug 22, 2025
  If the casters on your Direct Supply Medical Equipment bed are making a ratcheting noise, ensure that the casters are unlocked and that the caster locks are facing up.
D
Dalton SnyderAug 27, 2025
Why is my Direct Supply Medical Equipment bed moving slowly?
- H
  haley95Aug 27, 2025
  If your Direct Supply Medical Equipment bed is moving slowly, ensure the power cord is fully plugged into the wall outlet. Plugging it back in should restore the bed to its normal speed.

Direct Supply Panacea 6300 Specifications

General

Category	Medical Equipment
Manufacturer	Direct Supply
Material	Steel frame with vinyl upholstery
Features	Adjustable height, removable arms
Power Requirements	120V AC, 60Hz