Direct Supply Panacea 6300 User Manual (English)

Other manuals for Direct Supply Panacea 6300

Questions and Answers:

M
Micheal MyersAug 2, 2025
How to troubleshoot Direct Supply Medical Equipment bed that doesn't work?
- J
  jsmithAug 2, 2025
  If your Direct Supply Medical Equipment bed isn't working at all, first check if the bed is properly plugged into a working wall outlet. A damaged power cord could also be the culprit, in which case you should contact Direct Supply Equipment & Furnishings for a replacement. Ensure all wire connections and power cords are securely connected. Also, make sure the pendant is properly plugged in and the connection holder is closed. If the pendant itself is faulty, replacing it might solve the issue. If a blown fuse in the control box is suspected, unplug the bed for 5 minutes; if the problem persists, contact Direct Supply Equipment & Furnishings.
J
Jeffrey PalmerAug 7, 2025
What to do if some functions of my Direct Supply Medical Equipment bed aren't working?
- A
  Andre ChavezAug 7, 2025
  If one or more functions of your Direct Supply Medical Equipment bed aren't working, start by checking all wire connections to ensure they are secure. A faulty pendant could also be the cause; if the bed works with a different pendant, replace the original. A damaged actuator cord may also be responsible, requiring replacement by contacting Direct Supply Equipment & Furnishings. Finally, a faulty actuator might be the issue. If the actuator now works with a different pendant button, replace the control box after verifying the pendant works. If the actuator still doesn’t work, replace the actuator.
N
nicholstimothyAug 12, 2025
Why is my Direct Supply Panacea 6300 bed not level?
- J
  Jose FullerAug 12, 2025
  If your Direct Supply Medical Equipment bed is not level, it might be due to an actuator becoming unplugged from the control box; plug the actuator back in. Also, check for any obstructions that may have occurred during raising or lowering the bed and reposition the bed or remove the object. Uneven weight distribution on the bed can also cause this issue; remove the cause of the uneven weight. After correcting these potential causes, lower the bed completely until all movement stops, which should level the bed, and it should remain level when raised again.
D
dwrightAug 17, 2025
What to do if Direct Supply Medical Equipment bed stalls during operation?
- B
  brent65Aug 17, 2025
  If your Direct Supply Medical Equipment bed stalls while operating, it may be due to an obstruction. Remove the obstruction and wait before using the bed frame again. Avoid repeatedly trying to override the stall, as this can shorten the device's lifespan.
C
christinareyesAug 22, 2025
How to fix ratcheting noise from Direct Supply Panacea 6300 bed casters?
- J
  Jennifer BurtonAug 22, 2025
  If the casters on your Direct Supply Medical Equipment bed are making a ratcheting noise, ensure that the casters are unlocked and that the caster locks are facing up.
D
Dalton SnyderAug 27, 2025
Why is my Direct Supply Medical Equipment bed moving slowly?
- H
  haley95Aug 27, 2025
  If your Direct Supply Medical Equipment bed is moving slowly, ensure the power cord is fully plugged into the wall outlet. Plugging it back in should restore the bed to its normal speed.

Direct Supply Panacea 6300 Specifications

General

Category	Medical Equipment
Manufacturer	Direct Supply
Material	Steel frame with vinyl upholstery
Features	Adjustable height, removable arms
Power Requirements	120V AC, 60Hz

Summary

Introduction

Definitions and Symbols

Defines key terms and symbols used in the manual for clarity and safety.

Device Overview and Purpose

Provides a general overview of the Panacea 6300 Bariatric Bed's purpose and design.

Safety Warnings and Precautions

General Operational Safety

Covers essential safety precautions, including explosive gases, fire hazards, and general use.

Electrical and Fire Hazard Warnings

Details risks of electrocution and fire hazards, emphasizing proper electrical handling and use.

Safety Warnings Continued

Entrapment, Restraint, and Weight Limits

Focuses on entrapment risks, assist device usage as restraints, and weight capacity limitations.

Safe Operation and Component Handling

Covers safe operation, cord routing, caster locking, and body weight distribution.

Safety Warnings Continued

Service, Supervision, and Evacuation Procedures

Guidelines for authorized service, supervision requirements, and emergency evacuation procedures.

Entrapment Risk Mitigation and Fire Safety

FDA guidance on entrapment zones and steps to reduce fire risks from electrical components.

Safety Warnings Continued

Warning Labels and Accessory Compatibility

Explains warning labels regarding incompatible side rails and mattresses and their hazards.

Safety Warnings Continued

Product Symbols and Their Meanings

Provides a comprehensive guide to understanding the various product symbols and their implications.

Intended Use and Critical Safety

Contraindications and General Dangers

Details who should not use the bed and critical general safety warnings, including dangers and shock hazards.

Safety Warnings Continued

Fire Hazards and Operational Precautions

Specific warnings about fire hazards with oxygen equipment and general operational safety.

Product Integrity and Weight Capacity

Critical warnings about accessory compatibility, weight limits, and safe positioning.

Safety Warnings Continued

Entrapment Prevention and Rail Safety

Detailed information on entrapment risks, FDA guidelines, and warnings for compatible assist rails.

Mattress Specifications and Accessories

Mattress Compatibility for Entrapment Safety

Crucial information on selecting the correct mattress to prevent entrapment hazards.

Standard Features and Optional Accessories

Lists the bed's standard features and optional accessories available.

Environmental and Electrical Specs

Technical Specifications Data Table

A table detailing the bed's environmental, electrical, and physical specifications.

Directions for Use and Setup

Unpacking and Initial Bed Inspection

Step-by-step instructions for unpacking the bed, inspecting for damage, and initial setup.

Bed Assembly and Pre-Use Checks

Guidelines for assembling the bed and performing essential pre-use checks for safety.

Mattress Retainer Adjustment Guide

Headboard and Footboard Installation

Assist Device Installation and Safety

Assist Device Assembly and Warnings

Instructions for assembling assist devices and crucial warnings about entrapment and compatibility.

Accessory Risks and User Responsibility

Discusses risks associated with specialty mattresses and accessories, emphasizing user responsibility.

3-Position Assist Device Operation

Width Extension Adjustment Guide

Wall Guard Installation Procedure

Bed Functions and Control Operation

Hand Control Pendant Usage Guide

Explains the functions of the hand control pendant for various bed movements.

Cardiac Chair and Staff Control Pad Use

Details the Cardiac Chair function and the operation of the 5-function staff control pad.

Trendelenburg Functions and Power Cord Storage

Information on Trendelenburg functions and how to store the power cord.

Bed Mobility and Stabilization Methods

Caster Locking for Bed Stability

Instructions on using caster locks to stabilize the bed and prevent unintended movement.

Battery Backup System Installation

Battery Installation and Initial Charging

Procedures for installing, charging, and initial use of the battery backup.

Battery Backup Usage and Safety Warnings

Critical warnings regarding the emergency-only use, recharging, and potential damage to the battery.

Battery Backup Maintenance and Care

Battery Care, Safety, and Cleaning Tips

Tips for battery maintenance, safety precautions, and cleaning procedures.

Comprehensive Care and Maintenance

Initial and Quarterly Inspection Tasks

Outlines initial inspection steps and detailed requirements for quarterly checks.

Semi-Annual and Annual Maintenance Checks

Covers additional inspection points for semi-annual and annual maintenance schedules.

Maintenance Procedures and Cleaning

Maintenance Staff Duties and Checks

Notice to maintenance staff regarding procedures, evaluations, and pre-use checks.

Safe Bed Cleaning and Sanitization

Detailed instructions for safely cleaning the bed, avoiding damage and electrical hazards.

Servicing and Component Replacement

Actuator and Control Box Identification

Identifies components of the actuator and control box for servicing.

Control Box and Power Cord Replacement

Step-by-step procedures for replacing the control box and the main power cord.

Actuator Replacement Procedure Guide

Detailed instructions for safely replacing the bed's actuators.

Servicing Information and Materials

Operation and Storage Environment Guidelines

Recommended environmental conditions for operating and storing the bed.

Applied Parts and User Material Identification

Lists applied parts and materials accessible to the user for identification.

End of Life Product Disposal

Troubleshooting Common Bed Issues

Bed Power and Functionality Problems

Common issues like no power or specific functions not working, with troubleshooting steps.

Troubleshooting Continued

Bed Stalling, Leveling, and Caster Issues

Addresses problems like the bed stalling, not being level, or caster noise.

Slow Movement and Power Cord Troubleshooting

Troubleshooting for slow bed movement and power cord related problems.

Electromagnetic Compatibility (EMC) Overview

EMC Emissions Declaration and Guidance

Manufacturer's declaration on electromagnetic emissions and operating environment.

RF Equipment Separation Distance Guidelines

Guidelines for separation distances from RF equipment to prevent interference.

Electromagnetic Compatibility (EMC) Continued

EMC Immunity Declaration and Compliance

Manufacturer's declaration on electromagnetic immunity and compliance levels.

Limited Warranty Policy Details

Customer Service and Contact Information

Related product manuals

Direct Supply Panacea 3250

12 pages

Panacea Air Element Mattress

20 pages

Direct Supply ATLAS

24 pages

Direct Supply Attendant A5LC-1

24 pages

Direct Supply Panacea 6300 User Manual

Table of Contents

Other manuals for Direct Supply Panacea 6300

Questions and Answers:

Direct Supply Panacea 6300 Specifications

Summary

Introduction

Definitions and Symbols

Device Overview and Purpose

Safety Warnings and Precautions

General Operational Safety

Electrical and Fire Hazard Warnings

Safety Warnings Continued

Entrapment, Restraint, and Weight Limits

Safe Operation and Component Handling

Safety Warnings Continued

Service, Supervision, and Evacuation Procedures

Entrapment Risk Mitigation and Fire Safety

Safety Warnings Continued

Warning Labels and Accessory Compatibility

Safety Warnings Continued

Product Symbols and Their Meanings

Intended Use and Critical Safety

Contraindications and General Dangers

Safety Warnings Continued

Fire Hazards and Operational Precautions

Product Integrity and Weight Capacity

Safety Warnings Continued

Entrapment Prevention and Rail Safety

Mattress Specifications and Accessories

Mattress Compatibility for Entrapment Safety

Standard Features and Optional Accessories

Environmental and Electrical Specs

Technical Specifications Data Table

Directions for Use and Setup

Unpacking and Initial Bed Inspection

Bed Assembly and Pre-Use Checks

Mattress Retainer Adjustment Guide

Headboard and Footboard Installation

Assist Device Installation and Safety

Assist Device Assembly and Warnings

Accessory Risks and User Responsibility

3-Position Assist Device Operation

Width Extension Adjustment Guide

Wall Guard Installation Procedure

Bed Functions and Control Operation

Hand Control Pendant Usage Guide

Cardiac Chair and Staff Control Pad Use

Trendelenburg Functions and Power Cord Storage

Bed Mobility and Stabilization Methods

Caster Locking for Bed Stability

Battery Backup System Installation

Battery Installation and Initial Charging

Battery Backup Usage and Safety Warnings

Battery Backup Maintenance and Care

Battery Care, Safety, and Cleaning Tips

Comprehensive Care and Maintenance

Initial and Quarterly Inspection Tasks

Semi-Annual and Annual Maintenance Checks

Maintenance Procedures and Cleaning

Maintenance Staff Duties and Checks

Safe Bed Cleaning and Sanitization

Servicing and Component Replacement

Actuator and Control Box Identification

Control Box and Power Cord Replacement

Actuator Replacement Procedure Guide

Servicing Information and Materials

Operation and Storage Environment Guidelines

Applied Parts and User Material Identification

End of Life Product Disposal

Troubleshooting Common Bed Issues

Bed Power and Functionality Problems

Troubleshooting Continued

Bed Stalling, Leveling, and Caster Issues

Slow Movement and Power Cord Troubleshooting

Electromagnetic Compatibility (EMC) Overview

EMC Emissions Declaration and Guidance

RF Equipment Separation Distance Guidelines

Electromagnetic Compatibility (EMC) Continued

EMC Immunity Declaration and Compliance