FIGURE 2—AMPLIFIER CONNECTIONS REAR
These amplifiers incorporate an on-board
Directed ESP
®
Engine. In addition to
allowing menu-driven parameter adjust-
ment*, operate with security products
from Directed Electronics to incorporate
advanced ESP2 features. Your dealer
can use a Bitwriter
®
with Firmware
version 1.906 or later to access these
parameters.
** NNoottee::
The ESP
®
features are
obtained by using Bitwriter
®
and a
3 pin ESP
®
cable. While a
Bitwriter
®
can only talk to one
ESP
®
/ESP2 device at a time,
multiple amplifiers can be set to
respond to Arm/Disarm commands.
Simply repeat the TX ID Learn
procedure for each amplifier. When
To Next Page
Loading...
