EasyManuals Logo

Directed Electronics 474A User Manual

Directed Electronics 474A
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5
© 2010 Directed Electronics. All rights reserved.
Using the system
Locking
Pressing
AUX
AUX
AUX
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
for one second locks the system (if the door locks are con-
nected). The horn honks and the parking lights flash once to confirm the
system is locked. The Failsafe
®
Starter Kill also activates and prevents
the vehicle’s starter from cranking.
Important note: Horn honk and Failsafe are both optional features.
Unlocking
Pressing
for one second unlocks the doors (if connected). The horn
honks twice and the parking lights flash twice to confirm unlocking of
the system. The Failsafe Starter Kill is deactivated.
Disabling (optional) Starter Kill
If your remote control is lost or damaged, you can manually override
the starter kill. To do this, you must have the ve hi cle's ignition key and
know where the Valet button is located. Be sure to check with the in-
staller for the location of the Valet button.
To override the starter kill, turn the ignition on and press and release
the valet button once within10 seconds. The vehicle should start. If it
does not start, you may have waited too long; turn the ignition off and
repeat the process.
Location of Valet button:
____________________

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Directed Electronics 474A and is the answer not in the manual?

Directed Electronics 474A Specifications

General IconGeneral
BrandDirected Electronics
Model474A
CategoryRemote Starter
LanguageEnglish

Related product manuals