Directed Electronics AM5 - Zones; Long Term Event History

© 2003 directed electronics, inc.
21
zones
NNOOTTEE::
The Warn Away
®
response do not report on the LED.
long term event history
The control module will store the last 2 triggers (zone numbers) in memory. To access
the event history use the following procedure.
1. Turn the ignition switch off and press and hold the integrated LED/Valet
®
switch.
2. While holding the integrated LED/Valet
®
switch turn the ignition On.
3. Release the integrated LED/Valet
®
switch.
4. Within 5-seconds, press and release the integrated LED/Valet
®
switch.
The LED will flash in groups indicating the last two zones reported triggered. For
example, if zone 2 and 3 were the last two zones to be triggered, the LED will flash
two times followed by a pause and then flash three times followed by a pause.
Zone
Number
Trigger Type Input Description
1 Instant trigger Hood and/or trunk pin switches.
2 Multiplexed input Heavy impact from on-board
Doublegurard
®
shock sensor.
3 Two-stage, progresses from warning
to full alarm
Door switch circuit.
4 Multiplexed Optional sensor, Inputs shorter than
0.8 seconds will trigger Warn Away
®
response, while inputs longer than
0.8 seconds will instantly trigger full
alarm.
5 Two-stage (similar to zone 3) Ignition input.