EasyManua.ls Logo

Directed Electronics 3808A

Directed Electronics 3808A
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Security System 3808A
Installation Guide
This product is intended for installation by a professional
installer only! Attempts to install this product by a per-
son other than a trained professional may result in severe
damage to a vehicle’s electrical system and components.
© 2012 Directed Electronics, Vista, CA
N3808A 2012-01
Question and Answer IconNeed help?

Do you have a question about the Directed Electronics 3808A and is the answer not in the manual?

Directed Electronics 3808A Specifications

General IconGeneral
BrandDirected Electronics
Model3808A
CategorySecurity System
LanguageEnglish

Summary

Wiring Diagram

10 Pin Main Harness

Details the connections for the 10-pin main wiring harness, including power, ground, and trigger inputs.

4 pin AuxiliaryPin switch Monitor Harness

Explains the connections for the 4-pin auxiliary harness, covering dome light supervision and unlock outputs.

3 pin Door Lock Harness

Details the connections for the 3-pin door lock harness, covering lock and unlock outputs.

5 pin RKE (Remote Keyless Entry) Harness

Details the 5-pin harness for Remote Keyless Entry, including trunk shunt and arm/disarm inputs.

Light flash Polarity Setting

Explains how to set the light flash output polarity for vehicle parking lights.

Programming System Features

Feature Menu

Lists available system features, options, and their default settings for configuration.

Feature Descriptions

Provides detailed explanations of system features and their consumer factory default settings.

Remote Control Programming and Deletion

System Testing and Impact Sensor Adjusting

RF Security Setting

Details how to test and adjust the RF security settings and the impact sensor.

OEM Security Setting

Dealer Security

Provides instructions for arming and operating the system using a dealer master remote.

Nuisance Prevention Circuitry (NPC)

Long Term Event History

Explains how to access and interpret the system's long-term event history.

Table of Zones

Lists LED flash codes and their corresponding input triggers or zones.

Rapid Resume Logic

Describes how the system retains its state after power loss or disconnection.

Troubleshooting: Alarm

Related product manuals