EasyManuals Logo

Directed Electronics 3808A User Manual

Directed Electronics 3808A
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
© 2012 Directed. All rights reserved.
OEM Alarm Arming (for add-on security system setting)
• Instant: When Armed by a pulse on the Arm input, the arming operation will be same as using a
TX to arm.
• Delay: When Armed by a pulse on the Arm input, the arming operation will have a 30 second Igni-
tion Override timer before fully arming. If the Ignition is turned on before the end of the 30 seconds
the system will disarm.
Remote Control Programming and Deletion
1. Open a door and turn the ignition on .
2. Press/release once and then press/hold the Valet button (one horn/siren sound confirms selection) or
press/release twice and then press/hold to delete remote controls (two horn/siren sounds confirms selec-
tion).
3. The button can be released (Learning exits in 30 seconds).
4. Press/hold the remote control
A U X
button until the transmit LED turns on solid (10 seconds) or if deleting all
remote controls press the
A U X
button of a programmed remote.
5. The horn/siren emits one sound to confirm. If deleting the Dealer Master Remote press and hold the "in-
sert unlock icon" button until the transmit LED turns on solid (10 seconds)
6. Repeat for each Consumer remote to be learned (up to four). For additional Dealer Master Remote con-
trols, enter the same code of the original Dealer Master Remote that has already been programmed to
the system.
7. Turn the ignition off or wait 30 second to exit learning, the horn/siren emits 2 sounds to confirm.
Note: If consumer remotes have been programmed to the system the main unit will be placed in dealer
mode by programming a Dealer Master Remote to the system. However, if a Dealer Master remote has
been programmed, it must be deleted before the system will accept the Consumer remotes.
Menu Table:
Item Function
1 sound/flash Auto learn new remote
2 sounds/flashes Delete all remote controls
Basic Remote Functions Table
Button
Press and Release
Shift (Press/
release “AUX”
first)
Press/Hold
for 2 secs.
AUX
AUX
Arm Silent Arm Arm and Panic
on
AUX
AUX
Disarm Silent Disarm No Function
AUX
AUX
Shift and Sensor
Bypass
No Function Trunk release
AUX
AUX
Optional Remote
Starter
Car Finder Panic on
NOTE: See Owner/Dealer Master Remote Guide for more details

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Directed Electronics 3808A and is the answer not in the manual?

Directed Electronics 3808A Specifications

General IconGeneral
BrandDirected Electronics
Model3808A
CategorySecurity System
LanguageEnglish

Related product manuals