24
© 2005 Directed Electronics—all rights reserved
Basic Usage
POWER ON AND OFF
1. Press button once to power on the PMP3520. After startup animation start-
up, you will see the main menu and can then continue the use of the PMP3520.
NOTE: If you locked the Lock Switch before powering on, the power will
not turn on. Unlock the Lock Switch and press the power button.
2. To power off the PMP3520, press the button again. The following mes-
sage will display, and the PMP3520 will shut down.
Note: If the PMP3520 can not be shut down by one short press, press
and hold the power button for 5 seconds, this forces power off
To Next Page
Loading...
Need help?
General