68
© 2005 Directed Electronics—all rights reserved
NOTE: To prevent battery discharging while upgrading, we recommend
that the AC Adapter be used.
NOTE: If you need to update both firmware and software, update the
firmware first.
1. Select Setting from main menu and press X/Enter button to enter.
2. Push the Navigation button left or right to select Info tab.
3. Push the Navigation button up or down to select Update Firmware.
4. Push the Navigation button to the right. Message "Confirm? Yes No" will
appear on the display.
5. Push the Navigation button to the right or left to select Yes and press the
Navigation button in to start to upgrade firmware. Or, select No to cancel
upgrade.
6. When firmware upgrade completes, system will restart.
UPGRADE SOFTWARE
Use the following procedure to upgrade the PMP3520 software:
To Next Page
Loading...
Need help?
General