58
© 2005 Directed Electronics—all rights reserved
2. Connect your USB device, such as digital camera or USB memory stick, to
the other end of the USB host cable.
NOTE: The USB device and the PMP3520 should be turned on before
making the USB connections.
3. The message below will display when the connection is initialized. To copy
all the files from USB device connected to the PMP3520, press the REC z
key (button) as the message states.
4. Files from the USB device will be saved to a folder under USB OTG folder of
PMP3520, folder name will be USB00001, USB00002, etc.
5. If the connected USB device supports OTG, the following message will dis-
play.
NOTE: The PMP3520 supports limited USB devices. For an up-to-date
compatibility list, please visit http://www.directedmobileme-
dia.com
NOTE: It is suggested that the AC adapter be used to power the
PMP3520 while a USB device is connected.
To Next Page
Loading...
Need help?
General