Getting Started
1--13
Getting Started
DL105 PLC User Manual, 3rd Edition
Q. Which devices can I connect to the Com1 port of the DL105?
A. The port is RS-232C, fixed at 9600 baud, and uses the proprietary K-sequence
protocol. The port communicates with the following devices:
S DV-1000 Data Access Unit or Optimation Operator interface panels
S DirectSOFT (running on a personal computer)
S D2-HPP handheld programmer
S Other devices which communicate via K-sequence protcol should work
with the DL105 Micro PLC. Contact the vendor for details.
To Previous Page
Loading...