EasyManua.ls Logo

DirectLOGIC DL105 - I;O Quick Chart Selection

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting Started
1--5
Getting Started
DL105 PLC User Manual, 3rd Edition
There is a separate manual that discusses the DirectSOFT programming software
which is included with your software package.
All DL105 Micro PLCs have a built-in programming port for use with the handheld
programmer (D2-- HPP), the same programmer used with the DL205 family. The
handheld programmer can be used to create, modify and debug your application
program. A separate manual discusses the Handheld Programmer.
I/O Quick Chart Selection
The eight versions of the DL105 have Input/Output circuits which can interface to a
wide variety of field devices. In several instances a particular Input or Output circuit
can interface to either DC or AC voltages, or both sinking and sourcing circuit
arrangements. Check this chart carefully to find the proper DL105 Micro PLC to
interface to the field devices in your application.
DL105
P
t
N
b
INPUTS OUTPUTS
Part Number
I/O type /
commons
Sink /
Source
Voltage Ranges
I/O type /
commons
Sink /
Source
Voltage / Current
Ratings
F1--130AR AC / 3 -- 80 -- 132 VAC
90 -- 150 VDC
Relay / 4 Sink or
Source
12 -- 30 VDC, 7A *
12 -- 250 VAC, 7A *
F1--130DR DC / 3 Sink or
Source
10 -- 26.4 VDC
21.6 -- 26.4 VAC
Relay / 4 Sink or
Source
12 -- 30 VDC, 7A *
12 -- 250 VAC, 7A *
F1--130AD AC / 3 -- 80 -- 132 VAC
90 -- 150 VDC
DC / 1 ** Sink 5 -- 30 VDC, 0.3A (Y0--Y1)
5 -- 30 VDC, 0.6A (Y3--Y7)
F1--130DD DC / 3 Sink or
Source
10 -- 26.4 VDC
21.6 -- 26.4 VAC
DC / 1 ** Sink 5 -- 30 VDC, 0.3A (Y0--Y1)
5 -- 30 VDC, 0.6A (Y3--Y7)
F1--130AA AC / 3 -- 80 -- 132 VAC
90 -- 150 VDC
AC / 4 -- 20 -- 140 VAC, 47 -- 63 Hz
1.7A *
F1--130DA DC / 3 Sink or
Source
10 -- 26.4 VDC
21.6 -- 26.4 VAC
AC / 4 -- 20 -- 140 VAC, 47 -- 63 Hz
1.7A *
F1--130DR--D DC / 3 Sink or
Source
10 -- 26.4 VDC
21.6 -- 26.4 VAC
Relay / 4 Sink or
Source
12 -- 30 VDC, 7A *
12 -- 250 VAC, 7A *
F1--130DD--D DC / 3 Sink or
Source
10 -- 26.4 VDC
21.6 -- 26.4 VAC
DC / 1 ** Sink 5 -- 30 VDC, 0.3A (Y0--Y1)
5 -- 30 VDC, 0.6A (Y3--Y7)
* Subject to temperature derating chart. See Chapter 2 Specifications for your particular DL105 version.
** DC outputs have one electrical common, but it is accessible at three terminals on the output connector.
Handheld
Programmer