20
F. If you used WPS to automatically set up your wireless
connection, go to the “Completing Wireless Protected Setup”
section on page 21.
Otherwise, if you cannot use WPS or are unsure if you have
WPS, go to the “Manual Wireless Setup” section on page 23
to manually establish your wireless connection.
E. The POWER, Activity and Coax Network LEDs on the DCCK device
should light up. Wait for the POWER LED to stop flashing.
POWER, Activity and
Coax Network LEDs
Light Up
directv
®
whole-home dvr service
comPatible with connected home adaPter connection
To Next Page
Loading...
