DirecTV HR44 - Run the System Test

104
DIRECTV
®
HD DVR RECEIVER USER GUIDE
RUN THE SYSTEM TEST
The System Test allows you to run a basic diagnostics check on your DVR.
First make sure that:
1.
 6aaXdccZXi^dch¸_VX`h!XVWaZh!ZiX#¸VgZ^ceaVXZXdggZXian#HZZ6eeZcY^m'!¹Connections for TV and Equipment” for
more information.
2. There are batteries in the remote control and they are working correctly.
3. The access card is inserted in the DIRECTV
®
Receiver.
Follow these steps to run the diagnostics system test on your DVR:
1. Turn on your TV and the DVR.
2. Slide the mode switch to the DIRECTV position, then press MENU.
3. Select “Settings & Help”.
4. Select “Settings” then “Info & Test”.
5. If you have a High-Definition DVR, select “Run System Test”.
6. If your system does not pass the System Test, check any of these potential trouble areas: cabling, pointing the satellite dish,
phone connection and access card.
7. If you continue to have problems, call DIRECTV Customer Service at 1.800.531.5000.
8. You should run a system test several times before concluding that there is a problem. Occasional fluctuations in the phone
line or satellite signal can give temporary false readings.
T
T
R
O
O
U
B
B
LE
S
S
H
H
O
O
O
T
IN
G
G
T
T
IP
S
S
DRAFT
eeZcY^m'!¹eeZcY^
C
correctly.corr
your DVR:our DVR
n, then press MENU. n, then press ME
select “Run System Tselect “Run System
stem Test, checstem Test, che
ECT
ECT