EN
DAF COOL ULTIMATE
9
1- On/off: switching the unit on and off and selecting operating modes.
2- Temperature selectors: Desired temperature and blower speed selector (manual
mode only), control programming and degrees Fahrenheit.
3- Display: Screen where the selected function and the unit status are indicated.
Special display messages:
Lb: Low battery
E2: Electric fan or blower failure.
E3: Compressor failure.
E5: Compressor module overheating.
E9: Compressor protection (cabin down).
E0: Bad contact of the cables of the return air probe or faulty probe.
EC: Communications cable failure.
4- Shows the software version of the unit on the display.
When the unit is switched on, it checks the LEDs, 88--UC appears on the display and the
unit switches off.
Remote control
Remote control functions:
1- Unit on/off.
2- Control blower speed.
3- Temperature control.
Control panel
1
3
2
4
3
1
2
To Next Page
Loading...
