713
HOW TO
1. Press the Dirt Cup release
button.
3. Rinse filter with water until the
dirt disappears. Shake it out
and then let it dry for 24 hours
or until completely dry.
4. Put the dry filter back in by
aligning the tabs and twist
anti-clockwise into place.
You will hear a click when the
filter is secured back in its place.
Top view
of filter frame
2. Twist clockwise and pull the
Filter Frame out.
TIP: Place thumb and finger
in the grooves (x) then rotate
clockwise to remove, you will
hear it click.
NOTE: Do not use your vacuum cleaner with blocked filters and
without all the filters in place.
CLEAN THE RINSABLE FILTER
WARNING
To reduce the risk of personal injury - Unplug before
cleaning or servicing.
x
x
To Next Page
Loading...
