Dirt Devil BLADE 2 - Accessories and Spare Parts

16
2. Check the powered head for any blockages and
use a blunt object to remove the blockage.
(Fig.
23
/2).
3. To test for a blockage in the reach wand, drop a
small ball of paper into the wand. The paper will
drop through if the wand is clear. Use a broom
handle or similar blunt object to remove any
blockage (Fig.
23
/3).
ACCESSORIES AND SPARE PARTS
Visit our website at:
www.dirtdevil.de
On our website you will nd a large selection of
spare parts and accessories as well as practical
tips and tricks for your Dirt Devil product.
EN