5
CAUTION: Wrapping the cord too tightly with excessive stress on the cord may cause cord
damage. A damaged cord is an electrical shock hazard and could cause personal injury or damage.
ASSEMBLY
NOTE:
To remove the handle from the main body, pull the lock switch
outwards and pull the handle assembly out of the main body.
CAUTION: Always disconnect the appliance from the electric
outlet before assembling or disassembling unit or accessories.
Insert the end of the handle into the main body. Then, lift lock switch upward
until you hear a “click” to secure handle.
Attach the FLOOR HEAD to the open end of the dust bin aligning the
two pins to the holes. Proper connection is needed to operate the
LED lights and oor head for carpeted and hard surface oors.
TO DISCONNECT, unplug unit from power outlet and remove the oor
head by pulling it apart from the dust bin.
Close lock
switch until
it clicks
u
v
C
B
B
A
C
B
A
B
A
A
To Next Page
Loading...
