Need help?Do you have a question about the Disaster Area Designs DPC-5 Gen3 and is the answer not in the manual?
Describes the physical layout and connection points of the DPC-5 Gen3 controller.
Details the function of each input/output jack on the DPC-5 Gen3, including audio and MIDI connections.
Configures Loop 1 buffer, loop transition noise reduction, and tuner mute behavior.
Configures amplifier control via TRS jack and assigns the D footswitch function.
Details the four clock mode settings and their impact on tempo and MIDI clock output.
Configures preset banks, number of MIDI devices, and looper device selection.
Sets up loop buffers, noise reduction, tuner, expression, MultiJack, and amp control functions.
Configures tap tempo, display brightness, MIDI channels, and name displays.
Manages memory protection, USB modes, SysEx dumps, and factory reset options.
General| Type | MIDI Controller |
|---|---|
| Number of Loops | 5 |
| Number of Presets | 128 |
| MIDI | Yes |
| MIDI Channels | 16 |
| Expression Pedal Inputs | 2 |
| USB | Yes |
| Construction | Aluminum Enclosure |
| Power Supply | 9V DC |
| Inputs | 2 x Expression Pedal |
| Outputs | MIDI Out |
| MIDI Messages per Preset | Up to 16 MIDI messages per preset |
To Next Page
