Need help?Do you have a question about the Disaster Area Designs DMC.micro and is the answer not in the manual?
Details on buttons, LEDs, and display for device operation.
Overview of DC Power, MultiJack, MIDI, and USB ports.
Explains 5-pin DIN, 1/4", and USB connection types and cabling.
How to enter, navigate, and save settings in the DMC.micro setup menu.
Selecting and configuring connected MIDI devices via menus.
Configuration steps for Strymon and Chase Bliss Audio pedals.
Configuration for Eventide devices and Boss DD-500.
Navigating between pages and enabling/disabling modes like Preset, Device, Looper, Utility.
How Preset Mode works and how to set and save presets.
Controlling programs and bypass functions for connected devices.
Details on using the Looper Mode with supported devices.
Detailed settings for sending custom MIDI messages.
Reference for core setup parameters like PRST, DEV, USB, etc.
Reference for Utility and MultiJack specific configurations.
Details on connecting and configuring expression pedals, foot switches, and MIDI devices via MultiJack.
Instructions for using the USB port as HOST for pedals or MIDI interface for computers/iPads.
General| Weight | 4 oz |
|---|---|
| Number of Outputs | 1 |
| Programmable Presets | Yes |
| Footswitches | 2 |
| Expression Pedal Inputs | 1 |
| Channels | 16 MIDI channels |
| Power Supply | 9V DC |
| MIDI Connectivity | MIDI In/Out via TRS |
To Next Page
