t Reflex Duplicator Manual
- 37 -
Example of Editing Audio Tracks to Hard Drive
(For Duplicators with Hard Drive Installed):
We need to create a new Audio CD from 2 different Discs.
CD1: song 2, and song 4
CD2: song 3, song 4 and song 5
1. Go to function 11. Edit Audio Track
2. Press “ENT“ button.
3. Use UP or DOWN arrow button to select “HDD“. Then press
“ENT“ button.
4. Insert CD1 into the Master Reading Tray and a blank to Writer
Tray 1.
5. Wait until the following screen appears.
6. Use the UP or DOWN arrow button until you see “Track 2“ on
the 2
nd
line, and then press “ENT“ to confirm. A “*“ symbol
will appear on the left of “Track 2“ like following:
Total: 0 Trk 0m:
0s
Track 1: 4m:03s
DISCMAKERS 1.12
4.Audio
Edit Audio Tracks
Edit to Blank CD
Edit Audio Tracks
Edit to HDD
t Reflex Duplicator Manual
- 38 -
7. Use the UP or DOWN arrow button until you see “Track 4“ on
the 2
nd
line, and then press “ENT“ to confirm. A “*“ symbol
will appear on the left of “Track 4“ like following:
8. Use the UP or DOWN arrow button until you see following:
9. Press “ENT“ Once you submit your selection, you shall see
the following:
10. Once the loading process is complete, you shall see the
following screen:
11. Since you have not done with your selections yet, you need to
press DOWN button once and you shall see following:
12. Press “ENT“ button to continue and insert CD2 into the
To Next Page
Loading...