t Reflex Duplicator Manual
- 39 -
reader tray. When CD2 is inserted, wait until the following
screen appears.
13. Use the UP or DOWN arrow button until you see “Track 3“ on
the 2
nd
line, and then press “ENT“ to confirm. A “*“ symbol
will appear on the left of “Track 3“ like following:
14. Use the UP or DOWN arrow button until you see “Track 4“ on
the 2
nd
line, and then press “ENT“ to confirm. A “*“ symbol
will appear on the left of “Track 4“ like following:
15. Use the UP or DOWN arrow button until you see “Track 5“ on
the 2
nd
line, and then press “ENT“ to confirm. A “*“ symbol
will appear on the left of “Track 5“ like following:
16. Use the UP or DOWN arrow button until you see following:
17. Press “ENT“ Once you submit your selection, you shall see
the following:
Total: 5 Trk 24m:29s
re you done?
Total: 5 Trk 24m:29s
*Track 5: 4m:27s
Total: 4 Trk 20m:01s
*Track 4: 5m:26s
Total: 3 Trk 14m:35s
*Track 3: 4m:47s
Total: 2 Trk 9m:47s
Track 1: 4m:03s
t Reflex Duplicator Manual
- 40 -
18. Once the loading process to the hard drive is complete, you
shall see following screen:
19. Since we have finished selecting all of our tracks. Press “ENT“
button to continue to finalize. You shall see the following
screen:
20. Press “ENT“ button again to confirm the finalization and you
shall see the following screen:
21. When the whole process completes, your mixed copy will be
ejected and you shall see the following:
Then, you will be directed back to the main menu:
To Next Page
Loading...