Dish Network DISH Pro - Three Orbital Locations; Three Orbital Locations, up to 12 Tuners; PLUS Three Orbital Locations, DISH 1000; Three Orbital Locations, up to 24 Tuners

THREE ORBITAL LOCATIONS
DP SINGLE TUNER
DP PLUS DUAL TUNER
LEGACY TUNER
DISH
500
Three Orbital Locations with a Legacy Receiver
(1) DP Twin on a DISH 500
(1) DP Dual on a DISH 500 with I-Bracket
(1) DP34 Switch
(1) DP Adapter for each Legacy Receiver
Grounding according to the National Electric Code (NEC) and all local electrical codes is required.
DISH 500
DISH 500
Three Orbital Locations, with DP Plus Twin
(1) DP Plus Twin on a DISH 500
(1) DP Dual on a DISH 500
with I-Bracket
(1) DP Plus Separator
DP PLUS DUAL TUNER
DP SINGLE TUNER
Or Legacy Receiver
Single Legacy installations are not supported. Installations with
two Legacy receivers cannot view the third orbital location.
DISH 500
DISH 500
Three Orbital Locations, up to 12 Tuners
(1) DP Twin on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (3) DP34 Switches
To Receiver Tuner Inputs
Each switch must have a connected receiver to supply power
DISH 500
DISH 500
Three Orbital Locations, up to 24 Tuners
(1) DP Quad on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (6) DP34 Switches
To Receiver Tuner Inputs
To Receiver Tuner Inputs
Each switch must have a connected receiver to supply power
Super
DISH
Three Orbital Locations, SuperDISH
To Receiver Tuner Inputs
(1) SuperDISH (110°, 119°,
105° or 110°, 119°, 121°)
(1) DP34 Switch
Three Orbital Locations, DISH 1000
To Receiver Tuner Inputs
DISH
1000
(1) DISH 1000 optional
LNBFs (110°, 119°, 129°)
(1) DP34 Siwtch
Three Orbital Locations, DISH 1000
DP SINGLE TUNER
DP PLUS DUAL TUNER
Or Legacy Receiver
Single Legacy installations are not supported. Installations with
two Legacy receivers cannot view the third orbital location.
DISH 1000
(1) DP Plus Twin, DP LNBF on a
DISH 1000 (110°, 119°, 129°)
(1) DP Plus Separator