69
Connecting to a TV
DISH DVI Connections
The DISH DVI connection provides high-quality audio and video to your TV using one cable.
1 Connect a DISH DVI cable between the DISH DVI connection on the receiver and TV set or
monitor.
2 Turn on your receiver and TV using the front panel buttons.
3 Confirm that you are getting a picture from the receiver. Consult your TV user’s guide if you need
to change your TV input to display digital audio/video.
4 If you do not see a picture, see No Picture on the TV on page 70.
Note: In most cases connecting the digital audio/video cable will provide plug-and-play control of
the monitor’s display resolution and other settings. However, your TV may require selecting a
different format to display from the receiver during setup.
5 Turn up the volume on your TV and confirm you have sound. If you don’t have sound, your system
may require you to connect audio (red and white) RCA-type cables between the receiver’s Audio
Outputs and your TV’s audio input connections.
Chapter 11 381.fm Page 69 Thursday, May 21, 2009 6:19 PM
To Next Page
Loading...
