Ditch Witch 1030 User Manual

1030/1230 - LUBRICATION AND MAINTENANCE 51
LUBRICATION SCHEDULE
1030/1230 - LUBRICATION AND MAINTENANCE 51
LUBRICATION SCHEDULE
Hydraulic Oil and Filter
Check
With digging boom fully raised,
check hydraulic oil at dipstick (A)
before each operation. Add THF at
fill neck (A) as necessary to keep
oil level at highest line on dipstick.
Clean dust from cap by blowing
with low pressure air.
Change
Change hydraulic filter (B) every
250 hours.
Drain hydraulic oil at drain (C),
change filter, and refill at fill neck
with THF every 500 hours.
Hydraulic Oil and Filter
Check
With digging boom fully raised,
check hydraulic oil at dipstick (A)
before each operation. Add THF at
fill neck (A) as necessary to keep
oil level at highest line on dipstick.
Clean dust from cap by blowing
with low pressure air.
Change
Change hydraulic filter (B) every
250 hours.
Drain hydraulic oil at drain (C),
change filter, and refill at fill neck
with THF every 500 hours.

Ditch Witch 1030 Specifications

General

Fuel	Diesel
Transmission	Hydrostatic
Digging Depth	48 in (121.9 cm)
Trenching Width	6 inches
Drive System	4WD