Ditch Witch 1030 - Drive Belts

1030/1230 - LUBRICATION AND MAINTENANCE 59
MAINTENANCE SCHEDULE
1030/1230 - LUBRICATION AND MAINTENANCE 59
MAINTENANCE SCHEDULE
Drive Belts
Check drive belts regularly and
adjust tension as needed.
• Turn engine off.
• Move bail down into handlebar
and clamp in place.
• Engage digging chain control
until locked in place.
• Tighten or loosen both digging
belt adjustment nut (1) and
pump belt adjustment nut (2)
until springs (A and B) are
each 1.8” (48 mm) long.
See repair guide for more
information.
A
1
rg0020c.eps
B
2
rg0012c.eps
Drive Belts
Check drive belts regularly and
adjust tension as needed.
• Turn engine off.
• Move bail down into handlebar
and clamp in place.
• Engage digging chain control
until locked in place.
• Tighten or loosen both digging
belt adjustment nut (1) and
pump belt adjustment nut (2)
until springs (A and B) are
each 1.8” (48 mm) long.
See repair guide for more
information.
A
1
rg0020c.eps
B
2
rg0012c.eps