Ditch Witch 750 Tracker User Manual

750/752 Tracker - OPERATION 27
BEACON TRACKING MODES
750/752 Tracker - OPERATION 27
BEACON TRACKING MODES
Operation
1. Turn on drilling unit. Press and
hold download button to display
serial number on 750/752
Display.
2. Turn on 750/752 Tracker and check four-digit display code.
• Hold fore/aft/left/right button and press mode to review and
start sending code.
IMPORTANT: Continue to hold down fore/aft/left/right button
to adjust code.
• Use on/off button to advance
first two digits (1) and use
depth button to lower first two
digits.
• Use up arrow button to
advance last two digits (2) and
use down arrow to lower last
two digits.
• Press and hold button to
advance or lower value
quickly.
Operation
1. Turn on drilling unit. Press and
hold download button to display
serial number on 750/752
Display.
2. Turn on 750/752 Tracker and check four-digit display code.
• Hold fore/aft/left/right button and press mode to review and
start sending code.
IMPORTANT: Continue to hold down fore/aft/left/right button
to adjust code.
• Use on/off button to advance
first two digits (1) and use
depth button to lower first two
digits.
• Use up arrow button to
advance last two digits (2) and
use down arrow to lower last
two digits.
• Press and hold button to
advance or lower value
quickly.

Ditch Witch 750 Tracker Specifications

General

Brand	Ditch Witch
Model	750 Tracker
Category	GPS
Language	English