Ditch Witch 750 Tracker User Manual

28 750/752 Tracker - OPERATION
BEACON TRACKING MODES
28 750/752 Tracker - OPERATION
BEACON TRACKING MODES
3. Remove tracker control key from drilling unit and keep in
tracker operator’s possession.
4. Drill and track bore until drill head enters target pit or exits
ground.
5. Turn off tracker. After 8-16 seconds, tracker control light on
drilling unit will come on and hydraulic power to thrust and
rotation will be disabled.
6. Change downhole tools.
7. If you are tracking backreamer’s path, turn on tracker and
enable code transmission. After 8-16 seconds, tracker control
light on drilling unit will go off and thrust and rotation will
function.
If you are not tracking backreamer’s path, install tracker
control key on drilling unit. Tracker control light on drilling unit
will go off and thrust and rotation will function.
3. Remove tracker control key from drilling unit and keep in
tracker operator’s possession.
4. Drill and track bore until drill head enters target pit or exits
ground.
5. Turn off tracker. After 8-16 seconds, tracker control light on
drilling unit will come on and hydraulic power to thrust and
rotation will be disabled.
6. Change downhole tools.
7. If you are tracking backreamer’s path, turn on tracker and
enable code transmission. After 8-16 seconds, tracker control
light on drilling unit will go off and thrust and rotation will
function.
If you are not tracking backreamer’s path, install tracker
control key on drilling unit. Tracker control light on drilling unit
will go off and thrust and rotation will function.

Ditch Witch 750 Tracker Specifications

General

Brand	Ditch Witch
Model	750 Tracker
Category	GPS
Language	English